Cisco 6500 QOS
By enabling ‘mls qos’ you’re splitting your already small buffer space on this platform into 4 pieces and using just one of them for normal traffic “mls qos” activates QoS, and that includes _ALL_ of the default QoS configs including automatic classify and remark, and all the default queues.
This lets the interfaces use (almost) as much as possible from the common buffers on the switch.
mls qos queue-set output 1 threshold 1 3100 3100 100 3200 mls qos queue-set output 1 threshold 2 3100 3100 100 3200 mls qos queue-set output 1 threshold 3 3100 3100 100 3200 mls qos queue-set output 1 threshold 4 3100 3100 100 3200 mls qos
Voorbeeld:
http://ampere.rathlev.dk/3560-3750-QoS-basis-template.txt
The “QoS Overview” chapter of the “Cisco Catalyst 3750 QoS Configuration Examples” document explains the architecture:
http://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/91862-cat3750-qos-config.html#topic1
Any one ever worked on Cisco 6500 QOS specifically 6503 or 6524(help) needed
The 6500 series switch has unique, complex and restrictive hardware QOS compared to a software based router/switch.http://www.cisco.com/c/en/us/
compared to a routed platform such as ISR router.
On 12 Oct 2014 10:45, “Ahsan Rasheed” <ahsanrasheed9@gmail.com> wrote:> Hi All,
>
> I am having issue specifically doing QOS configuration on 6503 or 6524 or
> 6509 switches. I am unable to match any EF(voice) traffic for eompls(vlan
> based) on 6503 cisco switch. If i use any other router as 2811 or 2821 my
> QOS configuration works perfect but if i put 6503 as PE2 it does not work.i
> am using vlan based eompls.
>
> Below is the scenario & configuration which i am having issue.
>
>
> CE1(2821 router)(dot1Q)———>PE1(
> switch)——–>PE2(6503 switch)——->(dot1Q)(2821 switch)CE2.
>
> On CE1 i can match ip-precedence 5 traffic and mark that traffic to cos5 on
> outbound port.On PE1 i can match cos5 packet and mark with mpls exp top5 on
> inbound port, on outbound port i can match mpls exp 5.
>
> On PE2(6503) i am unable to match that mpls exp5 packet on inbound port.
> none of the configuration worked on 6500 series switches with mls qos, ,mls
> qos trust dscp,mls qos trust cos etc. Although i can match cos5 traffic on
> CE2 on inbound interface.i can not match mpls exp 5 traffic on 6503 and all
> i can see traffic as default-class on 6503 switch. I tried many things and
> many configurations on 6503 but nothing worked.If i put 2821 router as PE2
> instead of 6503 my qos configuration works. but why if i put 6503 my same
> qos configuration does not work?
>
> —match means=classification or classify
>
> Can anyone tell me how qos works on 6500 series switches or where i am
> having issue in my scenario.
> i am using this ios on 6503: s72033-advipservicesk9_wan-mz.
>
> below r my questions for 6503 qos:
>
> 1.do i need to use some other map tables,am i using correct map tables on
> 6503 as cos-dscp,dscp-cos,exp-dscp etc.
> 2.any other configuration of qos needed on 6503?
> 3.i am unable to match anything on outbound port of 6503.
> 4.on 6503 i am using sup720 and PFC3BXL.any specific configuration needed
> for PFC3bxl.
> 5. 6503 not allowing me to match qos-group on inbound interface, not
> allowing me to set cos5 on outbound interface. not allowing me to set cos5
> as an inbound interface.
>
>
> CE1(2821) config:
> ————————
> !
> class-map match-any EF
> match ip precedence 5
> class-map match-any data
> match ip precedence 3
> !
> !
> policy-map ip2mpls
> class EF
> set cos 5
> class data
> set cos 3
> !
> interface FastEthernet0/0
> no ip address
> duplex auto
> speed auto
> !
> interface FastEthernet0/0.455
> encapsulation dot1Q 455
> ip address 172.16.15.1 255.255.255.252
> service-policy output EF
> !
>
> PE1(2821) config:
> ————————-
> ————————-
> mls qos map cos-dscp 0 8 16 24 32 40 48 56
> !
> class-map match-all exp_3
> match mpls experimental topmost 3
> class-map match-all mpls_exp
> match mpls experimental topmost 5
> class-map match-any cos3
> match cos 3
> class-map match-any LOO1
> match cos 5
> !
> !
> policy-map EF
> class LOO1
> set mpls experimental imposition 5
> class cos3
> set mpls experimental imposition 3
> policy-map QOS_G_5
> class mpls_exp
> priority
> class exp_3
> bandwidth 500
> !
> interface Loopback0
> ip address 3.3.3.3 255.255.255.255
> !
> interface FastEthernet0/0
> ip address 192.168.23.2 255.255.255.0
> ip ospf network point-to-point
> duplex auto
> speed auto
> mpls ip
> service-policy output QOS_G_5
> !
> interface FastEthernet0/1.455
> encapsulation dot1Q 455
> xconnect 5.5.5.5 455 encapsulation mpls
> service-policy input EF
> !
> ——————————
> ——————————
> PE2(6503 qos):
> R1#show module
> Mod Ports Card Type
> No.
> — —– ——————————
> ———–
> 1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE
> SAL09401U2L
> 2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
> SAL114247YN
> 3 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC
> SAL0712AM69
> 4 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
> SAL10019J4N
> 5 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL
> SAD102805VM
> 6 2 Supervisor Engine 720 (Active) WS-SUP720-BASE
> SAD0846060F
>
> Mod Sub-Module Model Serial Hw
> Status
> —- ————————— —————— ———– ——-
> ——-
> 1 Distributed Forwarding Card WS-F6700-DFC3BXL SAD102504EF 5.3 Ok
> 2 Centralized Forwarding Card WS-F6700-CFC SAD111300PD 3.1 Ok
> 4 Centralized Forwarding Card WS-F6700-CFC SAL1004BQ2A 2.0 Ok
> 5 Policy Feature Card 3 WS-F6K-PFC3BXL SAD10270189 1.8 Ok
> 5 MSFC3 Daughterboard WS-SUP720 SAD102801G5 2.5 Ok
> 6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL1415FE95 1.11 Ok
> 6 MSFC3 Daughterboard WS-SUP720 SAD08440794 2.4 Ok
>
> R1#show mls qos maps
> Normal Burst Policed-dscp map:
> d1d2)
> d1 : d2 0 1 2 3 4 5 6 7 8 9
> ——————————
> 0 : 01 01 02 03 04 05 06 07 08 09
> 1 : 10 11 12 13 14 15 16 17 18 19
> 2 : 20 21 22 23 24 25 26 27 28 29
> 3 : 30 31 32 33 34 35 36 37 38 39
> 4 : 40 41 42 43 44 45 01 47 48 49
> 5 : 50 51 52 53 54 55 56 57 58 59
> 6 : 60 61 62 63
>
> Maximum Burst Policed-dscp map:
> d1d2)
> d1 : d2 0 1 2 3 4 5 6 7 8 9
> ——————————
> 0 : 00 01 02 03 04 05 06 07 08 09
> 1 : 10 11 12 13 14 15 16 17 18 19
> 2 : 20 21 22 23 24 25 26 27 28 29
> 3 : 30 31 32 33 34 35 36 37 38 39
> 4 : 40 41 42 43 44 45 46 47 48 49
> 5 : 50 51 52 53 54 55 56 57 58 59
> 6 : 60 61 62 63
>
> Dscp-cos map:
> d1 : d2 0 1 2 3 4 5 6 7 8 9
> ——————————
> 0 : 00 00 00 00 00 00 00 00 01 01
> 1 : 01 01 01 01 01 01 02 02 02 02
> 2 : 02 02 02 02 03 03 03 03 03 03
> 3 : 03 03 04 04 04 04 04 04 04 04
> 4 : 05 05 05 05 05 05 05 05 06 06
> 5 : 06 06 06 06 06 06 07 07 07 07
> 6 : 07 07 07 07
>
> Dscp-exp map:
> d1 : d2 0 1 2 3 4 5 6 7 8 9
> ——————————
> 0 : 00 00 00 00 00 00 00 00 01 01
> 1 : 01 01 01 01 01 01 02 02 02 02
> 2 : 02 02 02 02 03 03 03 03 03 03
> 3 : 03 03 04 04 04 04 04 04 04 04
> 4 : 05 05 05 05 05 05 05 05 06 06
> 5 : 06 06 06 06 06 06 07 07 07 07
> 6 : 07 07 07 07
>
> Cos-dscp map:
> cos: 0 1 2 3 4 5 6 7
> ——————————
> dscp: 0 10 18 24 34 46 48 56
>
> IpPrecedence-dscp map:
> ipprec: 0 1 2 3 4 5 6 7
> ——————————
> dscp: 0 8 16 24 32 40 48 56
>
> Exp-dscp map:
> exp: 0 1 2 3 4 5 6 7
> ——————————
> dscp: 0 8 16 24 32 40 48 56
>
>
> mls netflow interface
> mls qos map cos-dscp 0 10 18 24 34 46 48 56
> mls qos
> !
> class-map match-all exp_3
> match mpls experimental topmost 3
> class-map match-all EXP_5
> match mpls experimental topmost 5
> class-map match-all QOS_GROUP_5
> match qos-group 5
> class-map match-all prec5
> match ip precedence 5
> class-map match-all cos5
> match cos 5
> !
> policy-map mpls2ip
> class QOS_GROUP_5
> set cos 5
> !
> policy-map IN_FROM_R3
> class EXP_5
> set qos-group 5
> !
> interface Loopback0
> ip address 5.5.5.5 255.255.255.255
> !
> interface GigabitEthernet2/2
> mls qos trust cos
> or <———— (tried both individually but none worked)
> mls qos trust dscp
> !
> interface GigabitEthernet2/2.455
> encapsulation dot1Q 455
> xconnect 3.3.3.3 455 encapsulation mpls
> service-policy output mpls2ip
> !
> interface GigabitEthernet2/1
> ip address 192.168.34.4 255.255.255.0
> ip ospf network point-to-point
> mls qos trust cos
> or <———— (tried both individually but none worked)
> mls qos trust dscp
> mpls ip
> service-policy input IN_FROM_R4
> !
> Thanks & regards,
> Ahsan Rasheed
compared to a routed platform such as ISR router.
On 12 Oct 2014 10:45, “Ahsan Rasheed” <ahsanrasheed9@gmail.com> wrote:> Hi All,
>
> I am having issue specifically doing QOS configuration on 6503 or 6524 or
> 6509 switches. I am unable to match any EF(voice) traffic for eompls(vlan
> based) on 6503 cisco switch. If i use any other router as 2811 or 2821 my
> QOS configuration works perfect but if i put 6503 as PE2 it does not work.i
> am using vlan based eompls.
>
> Below is the scenario & configuration which i am having issue.
>
>
> CE1(2821 router)(dot1Q)———>PE1(
> switch)——–>PE2(6503 switch)——->(dot1Q)(2821 switch)CE2.
>
> On CE1 i can match ip-precedence 5 traffic and mark that traffic to cos5 on
> outbound port.On PE1 i can match cos5 packet and mark with mpls exp top5 on
> inbound port, on outbound port i can match mpls exp 5.
>
> On PE2(6503) i am unable to match that mpls exp5 packet on inbound port.
> none of the configuration worked on 6500 series switches with mls qos, ,mls
> qos trust dscp,mls qos trust cos etc. Although i can match cos5 traffic on
> CE2 on inbound interface.i can not match mpls exp 5 traffic on 6503 and all
> i can see traffic as default-class on 6503 switch. I tried many things and
> many configurations on 6503 but nothing worked.If i put 2821 router as PE2
> instead of 6503 my qos configuration works. but why if i put 6503 my same
> qos configuration does not work?
>
> —match means=classification or classify
>
> Can anyone tell me how qos works on 6500 series switches or where i am
> having issue in my scenario.
> i am using this ios on 6503: s72033-advipservicesk9_wan-mz.
>
> below r my questions for 6503 qos:
>
> 1.do i need to use some other map tables,am i using correct map tables on
> 6503 as cos-dscp,dscp-cos,exp-dscp etc.
> 2.any other configuration of qos needed on 6503?
> 3.i am unable to match anything on outbound port of 6503.
> 4.on 6503 i am using sup720 and PFC3BXL.any specific configuration needed
> for PFC3bxl.
> 5. 6503 not allowing me to match qos-group on inbound interface, not
> allowing me to set cos5 on outbound interface. not allowing me to set cos5
> as an inbound interface.
>
>
> CE1(2821) config:
> ————————
> !
> class-map match-any EF
> match ip precedence 5
> class-map match-any data
> match ip precedence 3
> !
> !
> policy-map ip2mpls
> class EF
> set cos 5
> class data
> set cos 3
> !
> interface FastEthernet0/0
> no ip address
> duplex auto
> speed auto
> !
> interface FastEthernet0/0.455
> encapsulation dot1Q 455
> ip address 172.16.15.1 255.255.255.252
> service-policy output EF
> !
>
> PE1(2821) config:
> ————————-
> ————————-
> mls qos map cos-dscp 0 8 16 24 32 40 48 56
> !
> class-map match-all exp_3
> match mpls experimental topmost 3
> class-map match-all mpls_exp
> match mpls experimental topmost 5
> class-map match-any cos3
> match cos 3
> class-map match-any LOO1
> match cos 5
> !
> !
> policy-map EF
> class LOO1
> set mpls experimental imposition 5
> class cos3
> set mpls experimental imposition 3
> policy-map QOS_G_5
> class mpls_exp
> priority
> class exp_3
> bandwidth 500
> !
> interface Loopback0
> ip address 3.3.3.3 255.255.255.255
> !
> interface FastEthernet0/0
> ip address 192.168.23.2 255.255.255.0
> ip ospf network point-to-point
> duplex auto
> speed auto
> mpls ip
> service-policy output QOS_G_5
> !
> interface FastEthernet0/1.455
> encapsulation dot1Q 455
> xconnect 5.5.5.5 455 encapsulation mpls
> service-policy input EF
> !
> ——————————
> ——————————
> PE2(6503 qos):
> R1#show module
> Mod Ports Card Type
> No.
> — —– ——————————
> ———–
> 1 4 CEF720 4 port 10-Gigabit Ethernet WS-X6704-10GE
> SAL09401U2L
> 2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX
> SAL114247YN
> 3 16 16 port 1000mb GBIC ethernet WS-X6416-GBIC
> SAL0712AM69
> 4 24 CEF720 24 port 1000mb SFP WS-X6724-SFP
> SAL10019J4N
> 5 2 Supervisor Engine 720 (Hot) WS-SUP720-3BXL
> SAD102805VM
> 6 2 Supervisor Engine 720 (Active) WS-SUP720-BASE
> SAD0846060F
>
> Mod Sub-Module Model Serial Hw
> Status
> —- ————————— —————— ———– ——-
> ——-
> 1 Distributed Forwarding Card WS-F6700-DFC3BXL SAD102504EF 5.3 Ok
> 2 Centralized Forwarding Card WS-F6700-CFC SAD111300PD 3.1 Ok
> 4 Centralized Forwarding Card WS-F6700-CFC SAL1004BQ2A 2.0 Ok
> 5 Policy Feature Card 3 WS-F6K-PFC3BXL SAD10270189 1.8 Ok
> 5 MSFC3 Daughterboard WS-SUP720 SAD102801G5 2.5 Ok
> 6 Policy Feature Card 3 WS-F6K-PFC3BXL SAL1415FE95 1.11 Ok
> 6 MSFC3 Daughterboard WS-SUP720 SAD08440794 2.4 Ok
>
> R1#show mls qos maps
> Normal Burst Policed-dscp map:
> d1d2)
> d1 : d2 0 1 2 3 4 5 6 7 8 9
> ——————————
> 0 : 01 01 02 03 04 05 06 07 08 09
> 1 : 10 11 12 13 14 15 16 17 18 19
> 2 : 20 21 22 23 24 25 26 27 28 29
> 3 : 30 31 32 33 34 35 36 37 38 39
> 4 : 40 41 42 43 44 45 01 47 48 49
> 5 : 50 51 52 53 54 55 56 57 58 59
> 6 : 60 61 62 63
>
> Maximum Burst Policed-dscp map:
> d1d2)
> d1 : d2 0 1 2 3 4 5 6 7 8 9
> ——————————
> 0 : 00 01 02 03 04 05 06 07 08 09
> 1 : 10 11 12 13 14 15 16 17 18 19
> 2 : 20 21 22 23 24 25 26 27 28 29
> 3 : 30 31 32 33 34 35 36 37 38 39
> 4 : 40 41 42 43 44 45 46 47 48 49
> 5 : 50 51 52 53 54 55 56 57 58 59
> 6 : 60 61 62 63
>
> Dscp-cos map:
> d1 : d2 0 1 2 3 4 5 6 7 8 9
> ——————————
> 0 : 00 00 00 00 00 00 00 00 01 01
> 1 : 01 01 01 01 01 01 02 02 02 02
> 2 : 02 02 02 02 03 03 03 03 03 03
> 3 : 03 03 04 04 04 04 04 04 04 04
> 4 : 05 05 05 05 05 05 05 05 06 06
> 5 : 06 06 06 06 06 06 07 07 07 07
> 6 : 07 07 07 07
>
> Dscp-exp map:
> d1 : d2 0 1 2 3 4 5 6 7 8 9
> ——————————
> 0 : 00 00 00 00 00 00 00 00 01 01
> 1 : 01 01 01 01 01 01 02 02 02 02
> 2 : 02 02 02 02 03 03 03 03 03 03
> 3 : 03 03 04 04 04 04 04 04 04 04
> 4 : 05 05 05 05 05 05 05 05 06 06
> 5 : 06 06 06 06 06 06 07 07 07 07
> 6 : 07 07 07 07
>
> Cos-dscp map:
> cos: 0 1 2 3 4 5 6 7
> ——————————
> dscp: 0 10 18 24 34 46 48 56
>
> IpPrecedence-dscp map:
> ipprec: 0 1 2 3 4 5 6 7
> ——————————
> dscp: 0 8 16 24 32 40 48 56
>
> Exp-dscp map:
> exp: 0 1 2 3 4 5 6 7
> ——————————
> dscp: 0 8 16 24 32 40 48 56
>
>
> mls netflow interface
> mls qos map cos-dscp 0 10 18 24 34 46 48 56
> mls qos
> !
> class-map match-all exp_3
> match mpls experimental topmost 3
> class-map match-all EXP_5
> match mpls experimental topmost 5
> class-map match-all QOS_GROUP_5
> match qos-group 5
> class-map match-all prec5
> match ip precedence 5
> class-map match-all cos5
> match cos 5
> !
> policy-map mpls2ip
> class QOS_GROUP_5
> set cos 5
> !
> policy-map IN_FROM_R3
> class EXP_5
> set qos-group 5
> !
> interface Loopback0
> ip address 5.5.5.5 255.255.255.255
> !
> interface GigabitEthernet2/2
> mls qos trust cos
> or <———— (tried both individually but none worked)
> mls qos trust dscp
> !
> interface GigabitEthernet2/2.455
> encapsulation dot1Q 455
> xconnect 3.3.3.3 455 encapsulation mpls
> service-policy output mpls2ip
> !
> interface GigabitEthernet2/1
> ip address 192.168.34.4 255.255.255.0
> ip ospf network point-to-point
> mls qos trust cos
> or <———— (tried both individually but none worked)
> mls qos trust dscp
> mpls ip
> service-policy input IN_FROM_R4
> !
> Thanks & regards,
> Ahsan Rasheed