Cisco IOS XR EEM

Cisco Netwerk (C-NSP)

Hi , I have the below EEM script and am trying to do it using IOS XR

event
manager applet SLA_OUT

event snmp oid 1.3.6.1.4.1.9.9.42.1.2.9.1.6.2 get-type exact entry-op eq entry-val 1 exit-op eq exit-val 2 poll-interval 5

action 1.0 syslog msg “Test”

action 1.1 cli command “enable”

action 1.2 cli command “configure
terminal”

action 1.3 cli command “ip route 0.0.0.0
0.0.0.0 192.168.13.3”

action 1.4 syslog msg “There is a problem on our Primary connection , move all the traffic to the Secondary Line”

event
manager applet SLA_OK

event snmp oid 1.3.6.1.4.1.9.9.42.1.2.9.1.6.2 get-type exact entry-op eq entry-val 2 exit-op eq exit-val 1 poll-interval 5

action 1.0 syslog msg “OK”

action 1.1 cli command “enable”

action 1.2 cli command “configure
terminal”

action 1.3 cli command “no ip route
0.0.0.0 0.0.0.0 192.168.13.3”

action 1.4 syslog msg “Our Primary
connection is functionin again , stop using the Secondary Line”